Samsung RS261M - Water Supply and Connection Checks

- 7/47 -
Step 1
① Inspect water comes when lever operation
after Water selection.
※ Initial product needs Water Tank filling time
- When the water does not come Check Step 2
- When the water comes Check TIP 2-4
Step 2 (Connection problem- Bending Hose)
① Inspect connection condition between
external tap and product connect
- Inspect connection of water pipe
- Inspect tap is closed.
② Inspect back Water Hose bending.
Step 3 (Piercing Valve using problem)
① Check hole blocking to not supplying water
when use Piercing Valve.
※ Check water supplying after disassemble
refrigerator connecting Hose
Step 4 (Filter Case problem)
① Water supplies after remove Water Filter, but
water does not come after connect.
- Replace filter case in same problem when
replace other filters.
Step 5
① When the water comes well through water
line, check water pressure when use external
water filter.
※ Water pressure of supplying should over
20PSI.
Check Point
Inspect Water supply failure
Tip 2-1. Inspect Water supply / supply
※ Need lever operation for 3 min on initial and after replace Filter !
Piercing Valve