Samsung RS261M - Ice Maker Water Valve Operation

- 8/47 -
Step 1
① Push the button for 2 sec which is on the
bottom of ice maker after disassemble Ice
Bucket.
② Check the water supplying after ice maker
tray twist operation.
- When the water does not come  Check
the Step 2
- When the water comes Check TIP 2-5
① 점ㄱ
Step 2
① Disassemble the backside Unit Cover .
② Check Purple 2-Wire after disassemble ASSY
Valve
- Normal part: 350~450 Ω
- Failure part : Open or 0 Ω
③ Disassemble the Main PBA Cover which is on
the back
④ Inspect Connector which is on right bottom
- Inspect CN70 No.3(RED)and CN73
No.7(PRP)
① Disassemble Unit Cover 2-
inspect Wire
CN 73 No.7(PRP) + CN70
No. 3(RED)
Check Point
Inspect ice maker Water supplying problem
Tip 2-2. Inspect Ice Valve operation
CN 73
CN 70