61
Setup and Reset
5
5 Setup and Reset
5.1.3 Configuring Select Sound
This menu is not available when the earphone is connected to the monitor.
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button.
4 Move to Select Sound controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Stereo: Enable the sound both from the left and right speakers.
Left Channel: Set the left and right speakers to play only the left channel of the sound source.
Right Channel: Set the left and right speakers to play only the right channel of the sound
source.
5 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6 The selected option will be applied.
To Next Page
Loading...
