Samsung S27E591C

69
Setup and Reset
5
5 Setup and Reset
5.5 Source Detection
You can activate Source Detection.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
5.5.1 Configuring Source Detection
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
 Auto: The input source is automatically recognized.
 Manual: Manually select an input source.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
System
Acceleration
Sound
Eco Saving Plus
Off Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Decide how input
sources will be
detected.
Auto
Manual
Off