Samsung S27E591C

71
Setup and Reset
5
5 Setup and Reset
5.7 Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
5.7.1 Configuring Power LED On
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
 Working: The power LED is on when the product is turned on.
 Stand-by: The power LED is on when the product is turned off.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
System
Sound
Eco Saving Plus
Off Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Off
Working
Stand-by
Set the status of the
power LED.