63
Setup and Reset
5
5 Setup and Reset
If using two monitors
1 Check the cable connection between the product and PC, and ensure the connectors are locked.
(Refer to "2.2 Connecting and Using a PC")
2 When the monitor is connected to the PC through HDMI, set PC/AV Mode to DVI PC.
(Refer to "5.4 PC/AV Mode")
3 Connect an earphone distributor to the [AUDIO OUT] port on your PC, then use a stereo cable to
connect the earphone distributor to the [AUDIO IN] port on the monitor.
4 Go to the select sound mode menu.
Select Left Channel for the monitor on your left. Select Right Channel for the monitor on your right.
To Next Page
Loading...
