74
Setup and Reset
6
6 Setup and Reset
6.1.2 Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the
monitor panel.
z This menu is not available when Bright is in Dynamic Contrast mode.
z This menu is not available when Game Mode is enabled.
z This menu is not available when Eco Light Sensor is set.
Configuring Eco Saving
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to Settings and press [ ] on the product.
3 Press [ ] to move to ECO and press [ ] on the product.
4 Press [ ] to move to Eco Saving and press [ ] on the product.
The following screen will appear.
z Off: Deactivate the Eco Saving function.
z Minimum: Change the monitor power consumption to 75% of the default level.
z Maximum: Change the monitor power consumption to 50% of the default level.
5 Press [ ] to move to the option you want and press [ ].
6 The selected option will be applied.
To Next Page
Loading...
