79
Setup and Reset
6
6 Setup and Reset
6.4 PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
z Supplied for the wide models only such as 16:9 or 16:10.
z If the monitor (when set to DVI, HDMI or DisplayPort) is in power saving mode or is displaying the
message Check Signal Cable, press the [ ] button to display the On Screen Display(OSD).
You can select PC or AV.
6.4.1 Configuring PC/AV Mode
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to Settings and press [ ] on the product.
3 Press [ ] to move to PC/AV Mode and press [ ] on the product.
4 Press [ ] to move to DVI, HDMI or DisplayPort and press [ ] on the product.
The following screen will appear.
To Next Page
Loading...
