10
Reverse Side (IL015E IL025E)
―
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
DP OUT DP IN UART OUT UART IN HDBT OUT HDBT IN SWITCH
DP OUT DP IN
HDBT OUT
HDBT IN SWITCHUART OUT UART IN
Thumbscrew
Parts Description
DP OUT
Connect to the DP IN port on the next cabinet, using a DP cable.
DP IN
Connect to the DP OUT port on the previous cabinet, using a DP cable.
―
This port can be used if an issue occurs with the HDBT video signal.
UART OUT
Connect to the UART IN port on the previous cabinet.
UART IN
Connect to the UART OUT port on the first cabinet and the UART IN port on the
next cabinet.
―
This port can be used if an issue occurs with the HDBT control signal.
HDBT OUT
Connect to the HDBT IN port on the previous cabinet.
HDBT IN
Connect SBB-IS08E to multiple cabinets, using the HDBT cable.
―
Refer to "Connecting to cabinets" on page 26 for details.
SWITCH
Select the connected input source (HDBT or DP).
―
After initial installation and servicing, tightly fasten the thumb screws using the appropriate tool.
To Next Page
Loading...
