Samsung SBB-IS08E - Connecting RS232 C Cables for Redundancy; Recommended Number of Devices for Connection for each Input Voltage

27
Connection 2-2
Connecting RS232C cables for redundancy
UART IN
HDBT IN UART OUT
RJ45 HDBT OUT
First cabinet Last cabinetSBB-IS08E
―
Cabinets connected to the same network can only be controlled.
Recommended number of devices for connection for
each input voltage
•
If using 110 V, you can connect at most three IL015E devices. To use IL025E devices with the same
voltage, connecting a maximum of four devices is recommended.
•
If using 220 V, you can connect at most six IL015E devices. To use IL025E devices with the same
voltage, connecting a maximum of eight devices is recommended.
―
Exceeding the recommended maximum number of devices can cause the circuit breaker of the
product to trigger due to overload.
POWER POWER
First cabinet Last cabinet