22
Connecting to a Video Device
•
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•
You can connect a video device to the product using a cable.
―
Connecting parts may differ in different products.
―
After connecting an external device, press the SOURCE button on either the remote control or SBB-IS08E to select the connected external device.
Connection Using an HDMI-DVI Cable
―
To properly play content saved on a video device that is connected to the product via an HDMI-DVI cable, make sure to configure the settings as follows.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
―
Picture → set each screen mode to Video/Image under Picture Mode
―
System → General → set HDMI Hot Plug to On
―
Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN
DVI IN
HDMI
To Next Page
Loading...
