52
ID Settings
HOME → ID Settings → ENTER E
ID Settings
-
The displayed image may differ depending on the model.
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
―
Press u/d to select a number, and press E.
―
Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select the cable currently connected to the computer and product.
•
RJ45(LAN) cable
Communicate with LED Signage Manager via the RJ45 cable.
Device ID Auto Set
Automatically assign an ID to the set connected via the RJ45 cable.
When multiple devices are connected, enable the feature on either the first or last device.
To Next Page
Loading...
