[ ENGLISH ]
System Menu Setting
¢ The Remotefunction works in Camera/Player/M.Cam/M.Hayer modes.
• The Remote option allows you to enable or disable the remotecontrol for use with the Camco_der.
t. Setthe Power switchto CAMERA or PLAYER.
2. Setthe Mode switch to TAPE or MEMORY CARD.
3. Press the MENU button.
[] The menu listwitl appear.
4. Move the Menu selector to the left or right to select System, then pressthe Menu selector.
5. Move the Menu selector to the left or right to select Remote, then press the Menu selector.
6. Move the Menu selector to the left or right to select On or Off, then press the Menu selector.
7. To exit, press the MENU button.
[ Note ]
Ifyou set the Remote to Off inthe menu and try to use it, the remote control icon((c_[])
wil! blink for 3 seconds on the LOD screen and then disappear.
..........................................................................................J
To Next Page
Loading...
