Basic Recording
I ENGLISH
+ The Nite Pixfunction works in both Camera and MCam modes.
4, The Nite Pixfunction enables you to record a subject in darkness.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE or MEMORYCARD. (SC-D354/D355only)
3. Slide the NITE PIX switch to ON.
• Nite Pix indicator (1_) appears on the LCD screen.
• The infrared light is turned on automatically.
4. Tocancel the Nite Pix function, slide the NITE PIX switch to OFF.
[ Notes ]
• The maximum recording distance using the infrared light is about 3 m (about 10 feet).
• If you use the Nite Pix function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.
• Nite Pix is not available while taking a photo image.
• In the Nite Pix mode, certain functions are not available, such as Exposure, White Balance,
Program AE, Digital Effect and BLO.
• If focusing is difficult in the auto focus mode when using the Nite Pix function, focus manually.
• Do not cover the Infrared Light with your hand.
• Do not set the NITE PIX to ON in bright lighting. It might damage the COD (Charge Coupled Device).
S
STBY [] 000:10
60ran
Nite Pix
To Next Page
Loading...
