Basic Recording
I ENGLISH I
+ The FADE function works only in Camera mode.
+ You cangive your recording a professional lookby using special effects
such as fade in at the beginning of a sequenceor fade out at the end of
a sequence.
To Start Recording
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (SC-D353/D354/D355 only)
3. Before recording, hold down the FADE button.
• The pictureand sound gradually disappear (fade out).
4. Press the Start/Stop button and at the same time
release the FADE button.
Recording starts and the picture and sound gradually
appear (fade in).
To Stop Recording (use Fade In/Fade Out)
5. When you wish to stop recording, hold down the
FADE button.
• The pictureand sound gradually disappear (fade out).
6. When the picture has disappeared,
press the Start/Stop button to stop recording.
a. Fade Out
(Approx. 4 seconds)
Hold down the FADE button
Gradual appearance
0. Fade Out
Gradual disappearance
J=
b. Fade In
(Approx. 4 seconds)
b. Fade II1 Release the FADE button
To Next Page
Loading...
