Playback
I ENGLISH
+ The playback function worksonly in Player mode.
4, You can monitorthe playback pictureon the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (SC-D353/D3541D355only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
• Adjust the angle of the LCD screen and set the brightnessor color if necessary.
5. Press the 41_(REW) button to rewind the tape to the starting point.
• To stop rewinding, press the • (STOP) button.
• The Camcorder stops automatically after rewinding is complete.
6. Press the i_/11(PLAY/STILL)button to start playback.
• You can view the picture you recorded on the LCDscreen.
• To stop the play operation, press the • (STOP) button.
Adjusting the LCD Bright/Colorduring Playback
+ You canadjust the LCD Bright/Color during playback.
+ The adjustment method is the same procedure as used in Camera mode. (see page 32)
[ Notes ]
• You can also view the picture on a TV screen, after connecting the Camcorder to a TV or VOR. (see page 71~72)
• Various functions are available in Player mode. (see page 73)
• For searching and viewing still images recorded onto tape. (see page 68)
To Next Page
Loading...
