Samsung SC-D352 - Basic Recording - First Recording Guide; Step-by-Step First Recording

Basic Recording
I ENGLISH
1. Connect a powersource to the Camcorder. (see page 20)
(A Battery pack or a AC Power adapter)
Insert acassette. (see page 36)
2. Removethe Lens cover.
3. Set the Power switch to CAMERA.
• Open the LCD screen.
• Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
Make sure that STBY is displayed.
• If the write protection tab of the cassette is open(set to save),
STOP and Protection!will be displayed.
Releasethewriteprotectiontab to record.
• Make sure the image you want to record appears on the LCD screen or Viewfinder.
• Make sure the battery level indicates that there is enough remaining powerfor your expected recording time.
4. To start recording, press the Start/Stop button.
• REC• is displayed on the LCD screen.
To stop recording,press the Start]Stop button again.
• STBY is displayed on the LCD screen.
[ Note]
Detachthe Batterypackwhenyouare finished recordingto preventunnecessarybatterypowerconsumption.