[ENGLISH]
Playback
+ The Speakerworks only in Player mode.
+ When you use the LCD screen for playback, you can hear recordedsound from the built-in Speaker.
- Takethe following steps to lower the volume or mute the sound while playing a tape
on the Camcorder.
1. Setthe Power switchto PLAYER.
2. Setthe Modeswitch to TAPE. (SC-D3531D354/D355only)
3. Press the I,/11(PLAY/STILL)to play the tape.
4. When you hear sounds once the tape is in play, use the Menu selector to adjust the volume.
• Avolume level display will appear on the LCD screen.
Levels may beadjusted from anywhere between 00 to 19 and you will not hear any sound
when the volume is seton 00.
• If you close the LCD screen while playing, you will not hear sound from the speaker.
[ Notes ]
• When the AV cable is connected to the Camcorder, you cannot hear sound from the Built-In Speaker
and cannot adjust the volume.
• The sound wilt return when you remove the connected AV cable from the jack of your Camcorder.
S ..........................................................................................
To Next Page
Loading...
