[ ENGLISH ]
Basic Recording
+ COLOR NITE SHUTTERfunction works only in Camera mode.
+ The LED light enables you to recorda subject in dark places without sacrificing color.
+ The LED light can be used with COLOR NITE SHUTTER function only.
1. Setthe Power switchto CAMERA.
2. Setthe Modeswitch to TAPE.
3. Press the COLOR NITE/LED LIGHT button until Color N. 1/15 (_) appears on the display.
[ Notes ]
• The COLOR NITE/LED LIGHTwill notturn ON or OFF while you are recording.
• The range of the LED light is limited. (up to 6.6ft (2m))
Danger
• The LED light can become extremely hot.
• Do not touch it while in operation or soon afterturning it off,otherwise serious injury may result.
• Do not placethe Camcorder into the carrying case immediately after usingthe LED light,
sinceit remains extremely hot for some time.
• Do not use nearflammable or explosive materials.
f
STBY [] 000:10
[] 60rll _
ColorN 1/15)
i/
To Next Page
Loading...
