[ ENGLISH ]
IEEE 1394 Data Transfer
System Requirements
• CPU: faster Intel® Pentium IllTM450MHz compatible.
• Operating system: Windows®98SE, ME, XP, Mac OS (9.1~102)
• Main memory: more than 64 MB RAM
• IEEE1394add-on card or built in IEEE1394 card
Recording with a DV Connection Cable
1. Setthe Power switchto PLAYER.
2. Setthe Modeswitch to TAPE. (SC-D3531D354/D355only)
3. Connectthe DV cable (not supplied) from the DVjack of the Camcorder
to the DV jack of the other DV device.
• Make sure that !_" is displayed on the LCD screen.
4. Press the Start/Stop button to begin REC PAUSE mode.
• PAUSE isdisplayed on the LCD screen.
5. Start playbackon the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
\
• If you want to pause recording momentarily,press the Start]Stop button again.
To stop recording, press the • (STOP)button.
[ Notes ]
• When using this Oamcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
• Operation is not guaranteed for all the recommended computer environments mentioned above.
To Next Page
Loading...
