Basic Recording
Making your First Recording
27
ENGLISH
Please make these preparations before recording.
■ Did you connect a power source?
(Battery Pack or AC Power Adapter)
■ Did you set the power switch to CAMERAposition?
■ Did you set the LOCK/STANDBY switch to STANDBY mode?
■ Did you insert a cassette? (see page 26)
■ Make sure that STANDBY is displayed in the OSD (if the red tab of the cassette is opened,
STANDBY will not be displayed)
■ Did you open the LENS CAP?
■ Make sure the image you want to record appears in the Viewfinder.
■ Make sure the battery level indicates that there is enough remaining power for recording. (see page 25)
a. To start recording, press the red START/STOPbutton.
Recording starts and REC should be displayed on
the Viewfinder.
REC
X:XX:XX
CAMERA
BATTERY
STANDBY
To Next Page
Loading...
