ENGLISH
Troubleshooting
Troubleshooting
✤ Before contacting a service center, perform the following simple checks. They might save you the time
and expense of unnecessary calls.
Self Diagnosis Display
Display Blinking Inform that... Action
slow the battery pack is almost Change it to a charged
discharged one.
fast the battery pack is fully Change it to a charged
discharged. battery.
TAPE END slow the tape has almost reached Prepare a new one.
its end.
TAPE END no the tape reached its end Change to a new one.
TAPE slow there is no tape in the camcorder. Insert a tape.
TAPE slow the tape is protected If you want to record,
from recording. release the protection.
D.EMG slow the camcorder has some 1. Eject the tape.
C.EMG mechanical fault. 2. Set to OFF
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your local service
center if the problem continues.
DEW slow moisture condensation see page 62.
has formed in the camcorder.
To Next Page
Loading...
