ENGLISH
Advanced Recording
PIP (Picture-in Picture; SCM53 only)
✤ The PIP (Picture-in-Picture) feature works in combination with the DIGITAL ZOOM function by using a
small, superimposed screen to show an image that is wider than the image being recorded. This should
help you to get a more clear idea of what you are recording.
- The PIP function works in CAMERAmode only.
1. Set the power switch to CAMERAmode and
LOCK/STANDBY switch to STANDBYmode.
2. Turn on DIGITAL ZOOM. (see page 33)
3. Press the PIPbutton. A small screen will appear.
4. Check the picture you are recording on the PIP screen,
and turn the Zoom button to “T” position to activate the
DIGITAL ZOOM mode.
■ Start recording by pressing the START/STOP button.
5. Press the PIPbutton again.
The small screen disappears.
Note: When you use PIP function, the PIP screen will be on the recording.
To Next Page
Loading...
