Samsung SCM51 - Digital Image Stabilizer (DIS)

35
ENGLISH
Advanced Recording
DIS (Digital Image Stabilizer, SCM53 only)
✤ The DIS function works in CAMERAmode only.
✤ DIS (Digital Image Stabilizer) is a handshake compensation function that compensates for any shaking
or moving of the hand holding the camcorder (within reasonable limits).
✤ It provides more stable pictures when:
■ Recording in the Zoom In mode
■ Recording a small object close-up
■ Recording and walking at the same time
■ Recording through the window of a vehicle
1. Set the power switch to CAMERA mode and LOCK/STANDBY switch to STANDBY mode.
2. Press the MENU ON/OFF button.
■ The MENU list will appear.
3. Turn the MENU dial to DIS.
4. Press ENTER.
■ The DIS setting will change.
5. Press the MENU ON/OFF button to end the setting.
■ When the DIS is set, the DIS mark( ) will be displayed
on the OSD.
Notes: 1. It is recommended you deactivate the handshake
compensation function when using a tripod.
2. The DIS function will not operate in the DSE mode.
(MENU)
DIS ......................OFF
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
EXIT: MENU
(MENU)
DIS ......................OFF
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
EXIT: MENU
(MENU)
DIS ......................ON
D.ZOOM ..............OFF
DEMO..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
EXIT: MENU