55
ENGLISH
Playing back a Tape
Various Functions in PLAYER mode
To view a STILL picture (Playback pause)
- Press (PLAY/STILL) button during playback.
- To resume playback, press (PLAY/STILL) button again.
Note: Your camcorder will automatically stop if it is left for more
than 5 minutes in STILL mode without operation in order to
prevent tape and head-drum wear.
To locate a scene (picture search)
- Press (FF) or (REW) buttons during playback.
To resume normal playback, release the buttons.
Zero RETURN
✤ The ZERO RETURN function works in STOP of PLAYER mode.
✤ You can Fast Forward or Rewind to 0:00:00 automatically.
1. Set the power switch to PLAYER mode.
■ Make sure that STOP is displayed.
2. Press the ZERO RETURN button.
■ Z.RETURN is displayed.
■ FF or REW works automatically.
Note: The ZERO RETURN button does not work when
the TAPE COUNTER reads 0:00:00.
Notes: ■ Press the C/RESET button at the start of the cassette or the required sequence.
■ When you wish to find this point on the tape again,
press Z.RTN button when playback is stopped.
REW FF
To Next Page
Loading...
