48
ENGLISH
Advanced Recording
Snap Shot (SCM53 only)
✤
With the SNAP SHOT feature, your camcorder functions like a regular film camera, allowing you to take
single still pictures.
- The SNAP SHOT function operates in the CAMERA mode.
1. Set the power switch to CAMERA mode and
LOCK/STANDBY switch to STANDBY mode.
2. Aim the camcorder at the image you want to record
and press the SNAP SHOT button.
■ Be careful not to shake your camcorder
to avoid blurring the image.
3. After the SNAP SHOT button has been pressed, your camcorder will record the image
for 6 seconds, then automatically return to STANDBY mode.
■ You can check the remaining time for SNAP SHOT recording by looking at the time displayed on
the screen.
■ To stop SNAP SHOT recording, press
the SNAP SHOT button again.
Note: While the SNAP SHOT feature is activated, you can not activate any other functions.
To Next Page
Loading...
