54
ENGLISH
Playing back a Tape
Notes:
■ SCM51/M52/M53 feature a monaural audio system. If your TV or VCR features
a stereo audio system, connect the audio cable to input “L” of your TV or VCR.
Playback
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect power source (battery or AC Power Adapter) to
camcorder.
Set the power switch to PLAYER mode.
3. Insert a tape you want to see.
■ Make sure that STOP is displayed.
4. Press the (PLAY/STILL) button.
■ The picture you recorded appears on the TV after 2 to 3
seconds.
■ Press ■ (STOP) to stop playing.
■ If the tape reaches its end during playback, the tape will
rewind automatically.
Notes:
■ The playback mode (SP/LP) and system are selected automatically, depending on
the tape format.
To Next Page
Loading...
