Samsung SCP-2120 - Preset and Sequence Operations

50_ functional description
functional description
English English _ 51
FUNCTIONAL DESCRIPTION
Day/Night
Main Menu/Camera Setting/Day/Night
The Day & Night function allows the camera to switch
between the Color and B/W modes.
Modes :
Auto : Operates in Color mode most times, and
switches to B/W mode if a low light level is
detected during nighttime.
Color : Operates in Color mode at all times.
BW : Operates in B/W mode at all times. By
using the Burst On/Off sub menu, burst
signals can be retained or disabled.
If the camera is in B/W mode and connected to
equipment that requires external sync through
burst signals, set the Burst On/Off option to “On.”
Duration :
The camera’s light sensitivity is adjustable as in the
chart below. The camera’s ambient light diversion
performance may vary depending on its
environment.
Color  B/W B/W  Color
Fast 2.5 Lux 4 Lux
Slow 0.8 Lux 6 Lux
Dwell Time :
The duration of both the lighting conditions can be
customized to let the camera delay the switching
between the daytime and night-time settings.
The Auto mode is not available when AGC is OFF. (Only the COLOR and B/W modes
are available.)
Using B/W mode under sunlight or a halogen lamp may decrease the focusing
performance.
►
•
-
-
-
❋
•
•
M


Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light BLC
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
Day/Night
Mode AUTO
Duration SLOW
Dwell Time 5 SEC
Others
Main Menu/Camera Setting/Others
Sync :
INTERNAL : Synchronizes the camera’s output
timing to the internal crystal.
LINE LOCK: Synchronizes the camera’s output
timing to the AC adapter power to
synchronize multiple cameras. This
option is useful when using a switch
such as Matrix Switcher.
LINE LOCK PHASE : Enables setting the
adapter’s synchronization
phase between 0 and
360°.
Image Adj :
Sharpness : Sharpens outlines of an image.
Color : Adjusts the color density of an image.
Freeze : Stops or reanimates an image.
►
•
-
-
-
•
-
-
•
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light BLC
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
Others
Sync INTERNAL
Image Adj
Freeze OFF