English English _ 7
CONTENTS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, or other
apparatus (including amplifi ers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fi t into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specifi ed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specifi ed
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualifi ed service personnel. Servicing is required when the
apparatus has been damaged in any way, such as powersupply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
INTRODUCTION
9
9 Features
11
Components and Accessories
12 Component names and
functions
contents
INSTALLING YOUR CAMERA
15
15 Speed Dome Camera and
Appliances Wiring Diagram
17 How to Set Up Protocols
and ID DIP Switches
18 Communication Protocol
DIP Switch Settings (SW2)
19 Camera ID DIP Switch
Settings (SW1)
26 Preparing Adapter and
Cables (Sold Separately)
27 Preparing and Installing
Camera Bracket
28 Installation Examples
29 On-Ceiling Mount Type
Installation Example
32 Flush Mount Type
Installation Example
INTERFACE SYMBOLS
35
36 Operating Your Camera
36 OSD Commands, Function
Chart, and Menu Controls
OPERATING YOUR CAMERA
37
37 OSD Menu Chart
important safety instructions
6_ important safety instructions
To Next Page
Loading...
Need help?
General
