Samsung SCP-2120 - Pan;Tilt Limit Configuration

62_ functional description
functional description
English English _ 63
FUNCTIONAL DESCRIPTION
Power On Resume
Main Menu/Sequence Setting/Power On Resume
Power On Resume :
This is useful when the power is disconnected and
reconnected due to power failures or other power
interruptions.
If the camera was performing a sequence action
prior to a power disconnection, the camera
automatically resumes the action when the power
is reconnected.
'Power On Resume' cannot resume a sequence action if the camera’s internal battery
is completely discharged after the camera was left without power supply for a long
time. (The data of the sequence action, however, remains safe even if the internal
battery is completely discharged.)
►
•
M

Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
P/T SETTING
Pan Limit
Main Menu/P/T Setting/Pan Limit
The moving ranges in the Pan directions can be
limited.
Position :
Selecting the Position menu brings up the
following screen if it is for the Pan Limit setting.
Move the joystick left and right to select a
movement range from the starting point to the
end.
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a
movement range from the starting point to the
end.
ON/OFF :
Cancels or activates the Pan/Tilt Limit functions.
►
•
•
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Jog Speed MANUAL
Max Speed Level 5
Pan Limit
Position
Activation OFF
START LIMIT
Enter: Set ESC: Exit
END LIMIT
Enter: Set ESC: Exit