English _15
CONNECTING WITH OTHER DEVICE
Camera Bracket
The camera bracket can be used to install the camera on the wall, ceiling or shelf.
Camera Bracket Specification
Name Description
Use Indoor
Installation Wall or Ceiling
Dimensions
57(W) x 47.2(H) x 100.5(L) mm/
2.25(W) x 1.86(H) x 3.95(L) inch
Weight 130g (0.29 lbs)
Operating Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F)
Accessories SCREW (M4 X L15) : 3 pcs
Adjusting the Camera Bracket
1. Choose an installation site that can sufficiently support the weight of
the equipments to be installed.
2. Attach the camera bracket to the wall using the supplied screws
(M4 X L15). 4x15 sized screws wall or ceiling.
3. Adjust the camera to target the video location and tighten the camera
bracket handle on the camera bracket. Install the camera on to the
male screw of the camera bracket by rotating the camera clockwise.
4. Loosen the handle by turning it counter clockwise and then adjust the
camera position. Tighten the handle, turning it clockwise to lock the
camera in position.
5. Connect the camera cable to the camera.
Handle
To Next Page
Loading...
