M
Marc VasquezSep 4, 2025
How do I switch to Live mode on my Samsung DVR during playback?
- LlisajohnsonSep 4, 2025
Press the Stop [@] button on the remote control, or click the [ ] icon on the launcher to switch to Live mode.
To Next PageTo Next PageHow do I switch to Live mode on my Samsung DVR during playback?
Press the Stop [@] button on the remote control, or click the [ ] icon on the launcher to switch to Live mode.
Why doesn't my Samsung DVR recognize the new HDD I installed?
See the compatibility list to check if the additional HDD is supported by the DVR.
What to do if I forgot my Samsung DVR password?
Contact the DVR administrator for help.
Why doesn't my Samsung DVR recognize all of my external HDDs?
It takes time for the DVR to recognize multiple external HDDs, so try again in a moment. The problem may occur due to a mechanical error of the HDD installed, so try again with a different HDD.
Why is the REC button not working on my Samsung DVR?
Check if there is free space on the HDD for the recording and if the record mode is set to ON in the record mode setting.
What does NO HDD icon mean on my Samsung DVR?
Check the HDD for connection. If the problem persists in a normal condition, contact the nearest service center to have the HDD checked by the service personnel.
Why are some channels showing a black screen on my Samsung DVR?
Check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. You can also input the video source of the camera directly into the DVR.
Why my Samsung DVR is not turning on?
Check if the power supply system is properly connected. Also, check the system for the input voltage from the power source. If these are fine, check the power supplier and replace it with a new one if necessary.
Why doesn't my Samsung SDS-P3042 DVR recognize the external SATA HDD I connected?
If you have connected an external storage device (external SATA HDD) to the Samsung Security System DVR, but the DVR seems not to recognize it, see the compatibility list of external storage devices to check if the connected device is supported by the DVR.
Why doesn't my Samsung Security System recognize the additional HDD I installed?
If you have installed an additional HDD on the Samsung Security System DVR, but it does not recognize the HDD, see the compatibility list to check if the additional HDD is supported by the DVR.
General| Brand | Samsung |
|---|---|
| Model | SDS-P3042 |
| Category | Security System |
| Language | English |
Details on installing a 4-channel DVR system, including front and rear connections.
Installation steps for 8-channel and 16-channel DVR systems.
Steps to connect the DVR for live monitoring, showing front and rear views.
Configuration of network settings, including connection mode and interface.
Searching for recorded data by selecting a specific date and time.
Searching for recorded data based on specific events like motion or alarm.
Searching for recorded data based on motion detection in specific areas.
Guidelines and recommendations for installing the DVR and checking the environment.
Details on connecting the SDC-7340BC camera and installing it.
Steps for connecting the DVR to a network via Ethernet.
Initial system startup procedures and shutting down the DVR.
Configuration of system properties, devices, and options for recording, event, backup, network.
Setting administrator and user permissions for accessing DVR functions.
Configuring settings for cameras, storage devices, remote devices, and monitors.
Checking and changing settings for storage devices like HDD and USB.
Setting up scheduled recording, event recording, and other recording parameters.
Configuring recording options for motion, video loss, and tampering events.
Checking backup devices and setting up the backup schedule.
Configuring network environment for remote access and mail forwarding.
Setting the network connection route and protocol.
Setting up DDNS sites for remote user network connection.
Steps for connecting the DVR to the network based on connection types.
Configuring router's port forwarding for external access to the DVR.
Step-by-step guide to connect to the DVR using a web browser on Windows.
Instructions for controlling PTZ cameras connected to the DVR.
Navigating and searching recorded video data using the search viewer.
Configuring recording schedules and event record durations.
Configuring motion, video loss, and tampering detection settings.
Common symptoms and their corresponding countermeasures for system issues.
Step 5: Configuring router's port forwarding for external access.
Steps to install the SmartViewer program on a local PC.
Detailed explanation of items and functions within the Live Viewer.
Controlling PTZ cameras remotely, including camera menu and preset settings.
