REAL PANEL JACKS
1
DC-IN This is the connector for a 12V power socket.
2
ALARM/RS485
ALARM IN 1~4: This is the port for an alarm input.
ALARM OUT 1~2: This is the port for an alarm output.
RS485: This is the port for connecting PTZ.
3
USB
This is the port for connecting a USB type of device.
It is used when you backup a video data or upgrade the system software.
4
AUDIO
AUDIO OUT: This is the port (RCA Jack) for an audio signal output.
(When outputting an audio signal, please use the speaker with a built-in audio amplifier.)
AUDIO IN: This is the port (RCA Jack) for an audio signal input.
5
SPOT OUT This is the port (BNC-type) for the SPOT OUT output.
6
THROUGH The THROUGH port can be used to send a video signal to another video device.
7
VIDEO-IN
This port is the port (BNC-type) for a composite video signal input.
It supports both the NTSC and PAL video signals.
8
VGA This is the port for the VGA signal output.
9
VIDEO OUT This is the port (BNC-type) for a composite audio signal output.
10
NETWORK This is the port for connecting to a network.
7
6
98
5 4 3 2 1
10
To Next Page
Loading...
