Samsung Smart Whisper AR KS Series - Sub PCB Installation(Optional)

English-58
Sub PCB installation(optional)
(Wired remote controller, central remote controller etc.)
1. Turn the power o and take o the cover panel of the indoor unit.
2. Attach the Sub PCB to the Case Sub PCB.
3. Assemble the Case Sub PCB to the indoor unit.
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
5. Connect the wire(remote controller, central remote controller etc) to the Sub
PCB.
6. Assemble the Cover PCB and the front panel.
N If the Sub PCB is not installed, arrange the wire for multi system (connection) as
shown in the illustration.
t 5IF4VC1$#JTBUUBDIFEUPCFDPOUSPMMFECZUIFXJSFESFNPUFDPOUSPMMFSBOEDFOUSBMDPOUSPMMFS
1
(
L)
2(N)
F1 F2
Sub PCB
Case Sub PCB
1(L) 2(N)
F1 F2
1(L) 2(N)
F1 F2
1(L
)
2(N
)
F
1 F
2
Wire for
multi system
connection