114
Network Status
MENU m → Network → Network Status → ENTER E
You can check the current network and Internet status.
Network Status
Your wireless network and Internet connection are setup and ready to use.
You are connected to the Internet. If you have any problems using online
services, please contact your Internet service provider.
CloseRetryIP Settings
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
***.
00 : 12 : fb : df : 29 : 76
―
The displayed image may differ depending on the model.
Wi-Fi Direct
MENU m → Network → Wi-Fi Direct → ENTER E
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless
mobile devices with your product directly without a router.
―
To use this function, your mobile device should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct,
follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•
PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes.
Your product automatically acquires all the network setting values it needs and connects to your
network.
•
PIN: Input the displayed PIN on your device.
―
If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
To Next Page
Loading...
