Samsung SMT-3231

137
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn O
Receiver
On
Yes
O
-
The displayed image may differ depending on the model.
Auto Turn O
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
•
No / Yes
―
If Auto Turn Off is set to Yes , running external devices will turn off at the same time as the product powers off.
―
May not be enabled depending on the device.
Switching between Anynet+ Devices
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Device List, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
―
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
―
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
―
If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
―
Make sure to switch to an Anynet+ device by using the Device List.