65
Volume
2
―
The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
•
Adjust the volume of a selected display.
•
The volume can be adjusted using the slider bar in the range of 0 to 100.
Mute
•
Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
Alert
3
Fault Device
•
This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor
error, or lamp error.
•
Select a display device from the list. The Repair button will be enabled.
•
Click the Refresh button to refresh the error status of the display device. The recovered display device will disappear from
the Fault Device List.
Fault Device Alert
•
Display device in which error is detected will be reported by email.
•
Fill in all required fields. The Test and OK buttons will be enabled.
Ensure the Sender information and at least one Recipient are entered.
To Next Page
Loading...
