Samsung SMT-3231

116
System
Chapter 08
Multi Control
MENUm → System → Multi Control → ENTERE
Multi Control
ID Setup
ID Input
MDC Connection
00
--
RS232C MDC
-
The displayed image may differ depending on the model.
Conguring settings for Multi Control
•
ID Setup
Assign an ID to a set. (Range: 0~99)
Press
▲
or
▼
to select a number, and press
E
.
•
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
•
MDC Connection
Select a method to connect to MDC to receive the MDC signal.
-
RS232C MDC: Communicate with MDC via the RS232C-stereo cable.
-
RJ45 MDC: Communicate with MDC via the RJ45 cable.