63
Getting Started with MDC
1
To start the programme, click Start → Programmes → Samsung → MDC Unified.
The login window appears after the MDC programme is launched.
Enter the user ID and password.
•
The default user ID and password are admin.
•
Make sure to change the password after the first login.
2
Click Add to add a display device.
SET ID Range: Select a range of the unique ID assigned to a monitor.
-
If the connection is established via RS232C, go to Serial and specify the COM Port.
-
If the connection is established via Ethernet, enter the IP that was entered for the display device.
To Next Page
Loading...
