12
_ © SAMSUNG Electronics Co., Ltd.
If PoE is not supported, connect the power adapter to the power port of the
phone by running the cable through the middle hole of the cradle as shown
in the figure. If the connected power adapter is plugged into an outlet, the
phone is booted. (The power adapter is supplied separately.)
4
Fix the cradle to the phone body by
fitting the bottom groove and then
securing the top side.
5
Secure the cable along the cable
guideline as shown in the figure. For the
cable of power adaptor, give some slack
before securing the cable to the
guideline to prevent easy pull-off.
To Next Page
Loading...
