SMT-i3100 User Guide _21
Dialing via a Speaker Phone
This is the function used to make a call via a speaker phone, instead of a handset.
1
Press the [Speaker] button in the standby mode.
2
Press a phone number and select the [Call] soft
button to place the call.
- In an Overlap dial mode, as soon as the phone
number is entered, the call is placed.
3
After a ring-back tone is heard, and the other
party answers the phone, start the conversation.
- If the handset is picked up during a call, the speaker is
turned off, and the conversation can be continued via
the handset.
4
When the call ends, press the [Speaker] button
again.
To Next Page
Loading...
