Samsung SMT-i3100 - Privacy; Password

42
_ © SAMSUNG Electronics Co., Ltd.
Privacy
This is the function used to set a password in the basic menu to protect privacy.
1
Select the [Menu] soft button Æ [5. Setting]
Æ [3. Privacy].
2
Select one option from [Enable/Disable], and
select the [OK] button or the [Save] soft button.
- If this function is enabled, the user should enter a
password when selecting the Menu from the soft
menu of a standby screen.
Password
This is the function used to change a password.
1
Select the [Menu] soft button Æ [5. Setting]
Æ [4. Password], then a screen appears where
you can enter the existing password.
- The initial password is ‘1234’.
2
Enter the existing password and press the [OK]
button or select the [OK] soft button.
Then, an input screen appears where you can
enter a new password.
Enter a new password, and press the [OK]
button or select the [OK] soft button to make it
valid.