Samsung SMT-i3100 - Dnd; In;Out Group

54
_ © SAMSUNG Electronics Co., Ltd.
DND
This is the function used to reject all incoming calls.
1
In the standby mode, select the [SVC] soft button
Æ [DND] and press the [OK] button.
2
Select [ON/OFF].
- When ‘Do Not Disturb’ is enabled in the standby
mode, the
icon is displayed on the top side and
the LED at the top blinks in red.
IN/OUT GROUP
This is the function used to add or remove your phone number to/from the system
group where you are registered.
1
In the standby mode, select the [SVC] soft button
Æ [IN/OUT GROUP] and press the [OK] button.
2
Enter your group number. Select the [SVC] soft
button Æ [IN TO GROUP/OUT TO GROUP].
- If you select to add yourself to a group, you can
receive the call connected to the same group.
- To use this function, your phone number should be
registered to the group in advance.
For more information, consult your system
administrator.