setup screen
Network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Event setup>.
3.
Select <Network disconnection> from
<Event action setup>.
4.
Set whether or not to
<
Enable
>
.
5. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page
116)
6. When done, click [Apply (
)].
128_ setup screen
To Next Page
Loading...
