setup screen
74_ setup screen
To set defined area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Appearing/
Disappearing>.
3.
Set the event rule to <Defined area
based rules>.
4. Click a corner point of a desired area in
the video to display the popup window.
5. Select a desired <Defined Area Based Rules>.
• Appearing/Disappearing : It detects objects found appearing within the defined
area’s boundary without passing through the boundary and remaining for a certain
period, or disappearing objects from the area.
6. Click [OK].
To cancel the existing area, right-click on the Defined area to display the popup
dialog and select [Delete] in the context menu.
7. When done, click [Apply
( )
].
To set entire area based rule
1. Set <IV analysis function> to
<Enable>.
2. Set the type to <Appearing/
Disappearing>.
3.
If you set the event rule to <Entire area
based rules>, this will display the popup
window.
4. Select a desired <Entire Area Based
Rules>.
• Appearing/Disappearing : It detects objects found appearing within the scene and
remaining for a certain period, or disappearing objects from the scene.
5. Click [OK].
To cancel the existing area, right-click on the Entire area to display the popup dialog
and select [Delete] in the context menu.
6. When done, click [Apply
( )
].
To Next Page
Loading...
