To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
1. Set it to <On>.
2. When done, click [Apply (
)].
3. Select the type and color masking of
desir
ed privacy area.
• Rectangle : Place the cursor at a
point in the video and drag it to
whatever you need.
You can overlap rectangles for
privacy area setup.
• Quadrilateral : Select 4 vertices (forming a quadrilateral) on the video.
4. Click on the video screen and drag to set the desired area.
5. Pr
ovide a name and press [OK].
6. If you want to delete an area in the list, select one and click [Delete ( )].
Audio setup
You can configure the I/O settings of the audio source from the camera.
1. From the Setup menu, select the
<Video & Audio (
)> tab.
2. Click <Audio setup>.
3. Set the audio input value.
• Source : Sets the audio input.
- Line : Line In audio input.
- External microphone : 3.5mm
jack type, powered active external
microphone.
- Internal microphone : Microphone that is built-in in the camera.
(Only for SNB-7002)
• Apply power to Ext. Mic. : If the external microphone connected has no separate
power supply, check this option to set camera to supply power to the connected
external microphone. The option is enabled if <External microphone> is
selected.
English _79
● SETUP SCREEN
To Next Page
Loading...
