46_ setup screen
SETUP
You can configure the audio & video, network, event and system settings of the camera via the
network.
1. In the Live screen, click [Setup (
)].
2. The Setup screen appears.
AUDIO & VIDEO SETUP
Video profile
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Video profile>.
3. Specify the <Megapixel Mode>.
You can select <2-Megapixel> or
<3-Megapixel>. If you change the
mode, you will see the video reset
message. If you confirm the message,
the video settings will be reset.
4. Select a <Video profile> number.
5. Click the input box of each item and
enter / select a desired value.
The context menu may differ depending on
the selected codec type.
• Default profile : This is the default video profile.
• E-mail/FTP profile : Video profile to be transferred to the specified email or FTP
site.
Only the MJPEG codec can be set as the E-mail/FTP profile.
• Record profile : This is the profile that is applied to video recording.
6. When done, click [Apply (
)].
setup screen
To Next Page
Loading...
Need help?
General
