Why Samsung SNV-3120 viewer got disconnected during monitoring?
If the Samsung Security Camera viewer gets disconnected during monitoring, it might be due to changes in camera or network configurations, so check all network connections. Also, if the camera is connected over a PPPoE network, poor network conditions could cause disconnections.
General| Brand | Samsung |
|---|---|
| Model | SNV-3120 |
| Category | Security Camera |
| Language | English |
Essential safety precautions to follow before using the apparatus.
Critical warnings to reduce the risk of fire or electric shock.
How to connect the camera to a DHCP-based modem for network access.
Steps to connect the camera to a PPPoE modem for network access.
Guide for connecting the camera to a broadband router.
Manual configuration of static IP addresses for network connection.
How to configure port forwarding on a router for remote access.
Steps for logging into the camera's web interface with default credentials.
General configuration settings for the camera module.
Configuring network interface, IP addressing, and connectivity.
Setting up Dynamic DNS for remote access using a hostname.
Solutions for common problems encountered with the camera.
To Next Page