English _51
● CAMERA SETUP
AUTO : DAY mode is automatically
switched into NIGHT mode by illumi-
nance or vice versa.
DAY
NIGHT/NIGHT
DAY : If you
select the <AUTO>, you can set the
brightness and interval to switch from
NIGHT to DAY.
MASK AREA : If there is bright light such
as spot light in shooting place at night,
you can set the size and location the
highlighted area.
Apply the mask if the specified area is
too bright at night.
WHITE BAL
You can correct the image colors by adjusting white balance.
1. Select the <WHITE BAL>.
2. Select the mode to set white balance.
DAY : You can set the values for red and
blue colors in DAY mode.
NIGHT : You can select the mode to use
by the illuminance of shooting place and
set the corresponding brightness and
color for the selected mode.
- BRIGHTNESS : Selects the brightness
to switch from DAY mode setting into
NIGHT mode setting.
- MODE : Selects the levels for red and blue colors by the selected mode.
- RED : Adjusts the level for red color.
- BLUE : Adjusts the level for blue color.
- R-GAIN/B-GAIN : Adjusts the current color temperature manually.
You can set the values for red gain and blue gain only in the first AUTO mode.
To Next Page
Loading...
