English _15
● INSTALLATION & CONNECTION
INSTALLATION
Disassembling
To connect the alarm in/out, the dome cover and lens cover are to be separated.
1. Using the L-wrench provided, loosen 3
screws by turning them counterclockwise
and separate the dome cover.
2. Lift up the inner cover while gently pressing
its both ends to separate it from the unit.
3.
Loosen 3 screws by turning them counter-
clockwise, press both left and right lock re-
leases inwards (in arrow direction) to unlock
the stopper, and then separate the camera
from the case.
Dome Cover
Inner Cover
Camera Body
Case
installation & connection
To Next Page
Loading...
